Carrier Cards and Transition Modules

TM912 3U VPX RTM for the C912 SBC
TM912 supports all C912 I/O variants. Signals from backplane pins that differ in function per C912 I/O variant are routed to jumpers on the TM912 PCB, which select the TM912 connector to which the signals are routed.
TM950 3U CompactPCI Transition Module
The transition module provides standard direct connection to I/O interfaces on the S950 and the hosted PMC module and is intended for use in commercial 3U cPCI air-cooled chassis.
TM870 Transition Module for the C870 3U VPX SBC
Aitech’s TM870 is provided as a complement to the C870 Core i7 Duo 3U VPX SBC.
TM530 3U VPX RTM for Aitech Graphics Products
The TM530 is designed for enclosures with a rear module depth of 80mm, as specified in ANSI/VITA 46.10 -2009 & IEEE 1101.11.
TM680 Transition Module for the C680 3U VPX Switch
The TM680 is designed for enclosures with an RTM mounting depth of 80 mm, as specified in ANSI/VITA 46.10-2009.
TM925 Transition Module for the C925 3U cPCI SBC
Aitech’s TM925 is provided as a complement to the C925 PowerQUICC III® e500-based, 3U CompactPCI SBC.
TM112 Transition Module for the C112 VPX SBC
The TM112 provides the following standard connectors for the C112 I/O interfaces. All connectors are on the TM112 front panel unless otherwise noted.
TM660 Transition Module for the C660 6U CompactPCI Switch

The TM660 is designed for enclosures with a rear module depth of 80 mm, as specified in IEEE 1101.11.  The TM660 may be adapted for use with enclosures whose rear module depth is greater than 80 mm by adding an extender (not included).  In order to accommodate all required I/O connectors, the TM660 front panel occupies two slots.

 

TM670 Transition Module for the C670 6U VPX Switch

The TM670 is designed for enclosures with a rear module depth of 81.5 mm, as specified in ANSI/VITA 46.10-2009. The TM670 may be adapted for use with enclosures whose rear module depth is greater than 81.5 mm by adding an extender (not included).  In order to accommodate all required I/O connectors, the TM670 front panel occupies two slots.  

TM1621 Transition Module
Designed as a supplement to the C162 and C163 6U Core™ i7 VME SBC, and intended for use in commercial air-cooled enclosures, the TM162 eliminates the need for harnessing and complex cabling fixtures when connecting to the various C162 or C163 I/O interfaces.
CM870 3U VPX PMC/XMC Carrier Board
The CM870 provides an additional active interface between the 3U VPX backplane and the on-board PMC/XMC module site.
TM106 Transition Module for C106 VME SBC & CM106 Carrier board
Provides standard connections for C106 PowerPC® VME SBC.
TM900 Transition Module for the C900 CompactPCI SBCs
Provides standard connection for all C900 G4+ PowerPC® CompactPCI SBC I/O interfaces.
TM800 Transition Module for the C800 CompactPCI SBC
Provides standard connection for all C800 Intel® CompactPCI SBC I/O Interfaces.
CM106 Rugged/mil PMC Carrier Expansion Card
Adds two PMC sites per backplane slot with minimum size, power consumption and cost.
TM102 Transistion Module for C102 VME SBC
Provides standard connections for C102 PowerPC® VME SBC I/O Interfaces.
CM900 Rugged/Mil 3U PMC Carrier Expansion Card
Provides additional active interface between the CompactPCI backplane and PMC.
TM100 Transition Module for the C100 VME SBC
Provides standard connection for all C100 G4+ PowerPC® VME SBC I/O Interfaces.