SP0-S 3U CompactPCI Radiation Tolerant PowerPC SBC

SP0-S 3U cPCI Radiation Tolerant PowerPC SBC
At the heart of Aitech's newly updated Space-rated SP0-S for LEO, MEO or GEO missions is NXP’s (formally Freescale) PowerQUICC®III MPC8548E – e500 System on Chip. This further enhanced SP0-S 3U CompactPCI SBC represents an evolution from the previous generation of Space COTS SP0 SBC.
  • Space-qualified 3U CompactPCI SBC
  • PowerQUICC-III MPC8548E @ 1.0 GHz
  • 400 MHz Core Complex Bus (CCB) Speed
  • One (1) Standard 32bit/33 MHz PMC Site
  • PICMG 2.0, Rev. 3.0 Compliant
  • System Controller or Peripheral
  • 1GB of DDR2 at 400 MHz with ECC
  • 1GB User Flash Memory with ECC
  • Redundant 512KB EEPROM Boot Memory
  • One (1) or Two (2) Gb Ethernet Ports
  • Three (3) Async Serial RS-422 Ports
  • Five (5) Single Ended TTL I/O lines
  • Four (4) High Performance DMA Engines
  • Four (4) 32 bit Timers (Internal to the CPU)
  • Three (3) Watchdog Timers
  • 1PPS port for Timing Synch.
  • Three (3) On-board Temperature Sensors
  • Six (6) on-board A/D voltage monitors
  • Options for Front Panel Connectors
  • VxWorks 6.7 or 6.9 RTOS Support
    • Optional VxWorks 7.0 or ARINC 653
  • Linux 4.14 and Xenomai/Cobalt Linux with NASA cFS (core Flight System)
  • Available in Conduction Cooled
  • Versions Series 100, 200 and 500
    • S500 utilize Hypertronics Hypertac cPCI backplane connectors
  • LEO, MEO and GEO Mission Options
You must or register to download the data sheet for this product. Registration is free, it only takes a minute!